:max_bytes(150000):strip_icc()/TakeNailDownToBoardSurface-56b3ed683df78c0b1353888e.JPG)
Nailing Into Concrete. Once you're ready to start nailing, make sure your fingers are away until you're ready to fire. On this renovation project we used multiple tools, but the one game changer for us was the ramset powershot concrete nailer.
I show how to nail a 2x4 into a concrete slab using a bang gun. Use a hammer drill with 3/16″ masonry bit to drill a hole through the wood and into the concrete floor. In order to hold tightly, a concrete nail must penetrate straight into the slab.
How To Use A Concrete Nail Gun.
Nailing into concrete floor remarkable customer service is a competitive advantage. Once the bit starts to bite into the poured concrete creating dust, extract the bit from the concrete and wood about every five seconds as you drill. The nails should penetrate the concrete surface.
Wear Safety Glasses And Hearing Protection.
Keep your fingers away from the trigger: In order to hold tightly, a concrete nail must penetrate straight into the slab. The hole should be the same.
Simply Drill A Hole Into The Concrete, Hold The Fixture You’re Fastening Over The Hole, Then Use A Hammer To Tap The Anchor Into The Hole.
As you drive in the pin, the sleeve expands outward,. Using this simple nail you can hang anything on cinder block, concrete, cement, or bricks. I show how to nail a 2x4 into a concrete slab using a bang gun.
Drill A Pilot Hole With A Drill And A Masonry Drill Inside The Concrete Wall.
Use an impact driver to drive a 3″ tapcon screw through the wood and into the floor. Once you're ready to start nailing, make sure your fingers are away until you're ready to fire. These nails are driven through a board and into concrete underneath, much like nailing a wood board to a wood floor.
I Show How To Nail A 2X4 Into A Concrete Slab.
The cut nail has a square, tapered shape with a square tip. On this renovation project we used multiple tools, but the one game changer for us was the ramset powershot concrete nailer. Use a hammer drill with 3/16″ masonry bit to drill a hole through the wood and into the concrete floor.